IG-4505 Oscilloscope Calibrator

The Heathkit IG-4505 Oscilloscope Calibrator is an accurate,
crystal-controlled, fast-rise square wave generator. It provides
an accurate time and amplitude signals needed to calibrate
Heathkit Oscilloscopes, as well as most other oscilloscopes.

SPECIFICATIONS

TIME OUTPUT SIGNAL

Range . . . . . . . . . . . . . . . . . . .   0.5 sec to 1 usec square wave in a 1-2-5 sequence

Accuracy. . . . . . . . . . . . . . . . . .   0.01%

Amplitude . . . . . . . . . . . . . . .	. .   200 mV peak (approx.)

Rise Time . . . . . . . . . . . . . . . . .   <= 4 ns

Overshoot . . . . . . . . . . . . . . . . .   <= 3%

Output. . . . . . . . . . . . . . . . . . .   50 ohm terminated cable


VOLTAGE OUTPUT SIGNAL

Ranges  . . . . . . . . . . . . . . . . . .   1 mV to 100 V peak square wave

Accuracy  . . . . . . . . . . . . . . . . .   Within 2% into 1Mohm load when referenced to the 1 V position

Rise Time . . . . . . . . . . . . . . . . .   <= 2 usec

Frequency . . . . . . . . . . . . . . .	. .   DC, 2 Hz to 10k Hz in a 1-2-5 sequence


GENERAL

Internal Voltage Reference. . . . . . . . .   5 volts +/- 1%

Power Requirements  . . . . . . . . . . . .   120/240 VAC, 50/60 Hz, 12 watts

Dimensions. . . . . . . . . . . . . . . . .   9-1/8” wide, 2-3/4” high, 4-1/4” deep