SB-610 Monitor Scope ---------------------- The Heathkit SB-610 is a convenient instrument for use with an amateur radio station to monitor "on-the-air" signals. The Scope can be used on any amateur band or other frequency from 160 through 6 meters without additional tuning or modification. The primary function of the Monitor Scope is to display the transmitted signal pattern, RF envelope, RF trapezoid, or RTTY cross pattern. It can also be used to monitor radio signals from other stations when used in conjunction with a receiver. A 2-tone generator (1500 and 1950 Hz sine wave audio oscillators) is built into the Scope for simple sideband adjustment and other test purposes. The Scope also has a special one-piece shield for the CRT to minimize the effects of stray magnetic fields on the trace. The cabinet and front panel styling matches that of the Heath SB Series. SPECIFICATIONS -------------- VERTICAL AMPLIFIER ------------ Input Resistance. . . . . . . . . . . . 100 kOhms Sensitivity Chart Optional Frequency Inputs Nominal input voltage (rms) per inch of vertical deflection ------------------------- ------------------------------------ | 10 Hz to 400 Hz 2.0 v Untuned | 400 Hz to 10 kHz (RTTY) 1.0 v | 10 kHz to 455kHz 500 mv | 455 kHz 70 mv | 1600 to 1680 kHz 200 mv | 2075 kHz 200 mv | 2215 kHz 200 mv Tuned | 2475 kHz 200 mv | 3000 kHz 400 mv | 3055 kHz 400 mv | 3395 kHz 500 mv | 5000 to 6000 kHz 600 mv HORIZONTAL AMPLIFIER -------------------- Frequency Response. . . . . . . . . . . +-3 db from 33 Hz to 15 kHz Sensitivity . . . . . . . . . . . . . . 800 mv per inch deflection Input Resistance. . . . . . . . . . . . 1 megohm SWEEP GENERATOR --------------- Recurrent Type. . . . . . . . . . . . . Sawtooth produced by internal generator Frequency . . . . . . . . . . . . . . . 15 to 200 Hz (variable) TONE OSCILLATORS ---------------- Frequencies . . . . . . . . . . . . . . Approx. 1500 Hz and 1950 Hz Output Voltage. . . . . . . . . . . . . 50 mv (nominal) GENERAL ------- Frequency Coverage. . . . . . . . . . . 160 through 6 meters (50-75 ohm coax) Signal Power Limits (rear coax conn.) . 15 watts to 1 kw Tube Complement . . . . . . . . . . . . 1 - 3RP1 CRT, medium persistence (green trace with screen filter). 1 - 6BN8 clamper, low level RF detector 1 - 6C10 sweep generator, horizontal amplifier. 1 - 6J11 twin phase-shift tone generator 1 - 6EW6 vertical amplifier 1 - germanium diode, sync rectifier 4 - silicon diodes, B+ rectifiers 2 - Selenium diodes, HV rectifiers Front Panel Controls. . . . . . . . . . Sweep Sweep Frequency - pull for Clamp Tone Generator Horizontal Gain Horizontal Position Vertical Gain Vertical Position Focus Intensity - AC Off Rear Panel Control. . . . . . . . . . . Transmitter attenuator. Attenuates to 24 db at approx. 8 db per step. Power Supply. . . . . . . . . . . . . . Transformer operated; fused at 1/2 ampere. Power Requirements. . . . . . . . . . . 105-125 or 210-250 VAC, 50/60 Hz, 35 watts. Cabinet Dimensions. . . . . . . . . . . 6-5/8" high x 10" wide x 11-1/8" deep. Net Weight. . . . . . . . . . . . . . . 9 lbs. 10 oz. (Data taken from Heathkit SB-610 manual by KB7RGG)