Eico 378 Audio Generator

  Based on a highly reliable circuit, the 378 Audio Generator produces a very low distortion
sine wave signal over a very wide range of frequencies and is ideal for use in testing audio
amplifiers for gain and frequency response, as a signal source for various bridge measuring
circuits, for modulation of RF signal generators, or any other application where a stable,
accurate audio sine wave must be used.

  Unlike most other audio generators that require interpretation of a dial setting with possible
error, the frequency-determining elements of the Model 378 are not continuously variable, but are
set by positive-setting detent switches that select combinations of 1% resistors and 2% capacitors
that make up the frequency-selecting network. This method of tuning enables repeatable accurate
setting to any individual cycle between 1 cps ad 110kc.

  The output level of this instrument can be set with great accuracy between 0 and 10 volts RMS
(or between -70 and +2db) on a 4-1/2 inch, 2% full-scale accuracy meter.

  Below 1 volt RMS output, the instrument is provided with a switch-selected internal 600 ohm
load that can be disconnected as desired.

Cabinet Size: (HWD) 8 1/2" X 12 1/2" X 9"

Weight: 16 lbs

$59.95 (1970)