Heathkit EUW-27 sine-square wave signal generator specifications

Taken from a 1968 Heathkit catalog, page 90.

Heath Malmstadt-Enke Lab Instruments

EUW-27 Sine-Square Generator

* Less than .25% sine wave distortion
* Less than .15 microsecond square wave rise time
* Sine and square wave output available simultaneously
* 20 Hz to 1 MHz in 5 bands
* Factory assembled and tested

EUW-27, 14 lbs...(REA Express or Motor Frt. Only)...............$94.00

EUW-27 SPECIFICATIONS
Sine wave
	Frequency range:  20 Hz to 1 MHz.
	Output volts (RMS):  0 to 10 volts, 0 to 1 volt, 0 to .1 volt, or 0 to .01 volt when
			     working into a high impedance load
	Source Impedance:  (+ or - 10%); 10 volt rante, 0 to 3.5k ohm; 1V, .1V and .01V range,
			   600 ohms
	Distortion:  Less than .25%, 20 to 20,000 Hz.
	Frequency response:  + or - 1.5 db 20 Hz to 1 MHz
Square wave
	Frequency range:  20 Hz to 1 MHz
	Output volts:  (P. to P) + or - 5%; 0 to 10 volt, 0 to 1 volt, 0 to .1 volt, into a
			high impedance load
	Source impedance:  (+ or - 10%); 10 volt range, 0 to 220 ohm; 1V and .1V ranges, 52 ohm
	Rise time:  less than .15 microsecond
General
		Frequency accuracy:  + or - 5%
		Power requirements:  105-125 V AC, 50/60 Hz, 55 watts
		Dimensions:  13" W x 8 1/2" H x 7" D

(Data taken from Heathkit catalog by Henry Parsons)