DX-20 CW TRANSMITTER KIT (DX-20) * Best Watts-per-Dollar Value * Clean Signal * Single-Knob Bandswitching Here in the DX-20 is a power-packed performer designed exclusively for CW work. An ideal transmitter for the novice, as well as for the advanced-class CW operator who appreciates a good clean signal, and wants the most watts-per-dollar" in his ham shack. The DX-20 features single-knob bandswitching and covers 80 through 10 meters using crystals or an external VFO (variable frequency oscillator). The efficient circuitry features a single 6DQ6A tube in the final amplifier stage for plate power input of 50 watts plus pi network output. Careful design is evident in both circuit arrangement and quality of components to bring you top performance at minimum cost. Controls are conveniently located for case of operation and easy-to-read panel meter indicates the final grid or plate current as selected by the panel switch. Access to the cabinet for crystal changing is provided by a removable metal pull-out plug on the left end of the cabinet. A convenient "tune/operate" switch allows tuning the oscillator without switching on the final amplifier. TVI is minimized through "tight" cabinet construction. Attractively styled and easy-to-build with complete instructions and plenty of pictorial diagrams for reference all the way through construction. Shpg.. Wt. 19 lbs. SPECIFICATIONS RF power Input 50 watts CW Output Impedance 50 to 600 ohms (non-reactive) Output coupling PI network Operation Crystal-External VFO Send coverage 80, 40, 20, 15 and 10 Tube complement 5U4GB rectifier 6CL6 oscillator 6DQ6A Final amplifier Power requirements 115 volts AC, 60 cycles, 150 Cabinet size 13" W. x 8 1/2" H. x 7" D. KB9JJA